EDID image for the Chi Mei N116B6 L02 panel at revision C1, an 11.6-inch display going by the N116 prefix, typical of netbooks and compact laptops. The file is 256 bytes, a full read of a 24C02-class EEPROM. When EDID corruption leaves the internal screen blank or at a wrong resolution, rewriting the correct block via I2C/DDC fixes the problem. Check the checksum in an EDID tool, confirm the panel code and revision, and back up the chip before programming.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 7 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →