Chi Mei N140B6-L02 panel EDID, for a 14.0-inch notebook display as indicated by the model code; no revision is listed. The file is 256 bytes, consistent with a complete 24C02 EEPROM dump. Graphics hardware reads this block over DDC to learn the native timing, so a corrupted copy can cause blank or distorted output. Decode it in an EDID viewer to check the fields and checksum, then flash it with an I2C programmer. Make a backup of the current chip before overwriting it.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 28 Apr 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →