EDID dump for the Chi Mei N140B6-L08 LCD panel; per Chi Mei naming the N140 prefix marks a 14.0-inch display. The name gives no revision. The 256 bytes match a full 24C02 EEPROM read, possibly with padding after the 128-byte base block. Repair use is rewriting the panel's identification memory when the system shows no picture, an unknown display or the wrong resolution. Program it with an I2C/DDC tool, confirm the suffix on the panel matches L08, and save the original data first.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 7 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →