EDID firmware for a Chi Mei N140BGE-L43 LCD panel, revision C2, a 14.0-inch display under Chi Mei part numbering. The image is 256 bytes, the size of a 24C02 serial EEPROM, and may include the base block plus extension or filler. It restores the identification and timing data the graphics driver reads at boot, fixing blank screens or wrong native resolution caused by a damaged EDID. Program it with an I2C tool only after confirming model and revision and dumping the current contents.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 7 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →