Chi Mei N140BGE-LA2 EDID data, revision C1, for a 14.0-inch notebook panel as the N140 code indicates. The 256-byte dump equals a complete 24C02-class EEPROM read. A technician loads it into an EDID viewer to verify timings and checksum, then writes it over the DDC/I2C lines. This is done when a corrupted identification block leaves the internal screen dark or misdetected. Make sure the variant and revision match the panel exactly, and save the original data first.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 28 Apr 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →