EDID image for the Chi Mei N140BGE-LB2 panel at revision C1. In Chi Mei numbering the N140 prefix stands for a 14.0-inch laptop display. Its 256 bytes match the capacity of a 24C02 EEPROM. Repair use is reprogramming the panel's identification memory when the system cannot detect it or defaults to a wrong mode. Suffixes such as LB2, LA2 or L43 are distinct variants, so match the full code and revision on the panel sticker. Back up the chip before flashing with an I2C programmer.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 7 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →