EDID dump of a Chi Mei N141I1-L03 notebook LCD, a 14.1-inch size going by Chi Mei part codes; no revision appears in the name. The 256-byte file corresponds to a full 24C02 EEPROM read, typically the base block followed by an extension or padding. It serves to recover a panel whose identification data was lost, which can cause a black screen or incorrect resolution. Decode it with an EDID tool to check the checksum, then write it via I2C. Read and keep the original contents first.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →