Panel EDID for a Chi Mei N141I3-L03 14.1-inch LCD, labelled as coming from a Lenovo T400 notebook. The file is 128 bytes, a single base EDID block that carries the manufacturer ID, native timing and checksum. Some notebooks expect a specific EDID before the internal display will work, so a dump from the matching machine is useful. Rewrite it over I2C when the panel identifies wrongly or not at all. Confirm the panel model and laptop match, and back up the current data before programming.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 28 Apr 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →