EDID block for the Chi Mei N141XB-L01 laptop panel, a 14.1-inch display per the N141 prefix. No revision is mentioned. At 128 bytes this is exactly one base EDID block with no extension. Technicians write it back when the panel's identification memory is blank or corrupt and the system shows no image or a generic monitor. Use an I2C/DDC programmer or EDID utility. If the target EEPROM is larger, only the first 128 bytes are filled. Verify the panel label and save the existing data first.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 7 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →