Display identification dump for a Chi Mei N1506-L01 LCD panel, revision C2, as stated in the name. At 256 bytes it is almost certainly an EDID image rather than a laptop BIOS: the block a panel reports to the graphics controller with its native resolution, timings and vendor ID. Technicians rewrite it when a panel shows no picture, wrong resolution or an unknown monitor after a corrupted EEPROM. Open it in an EDID viewer to check the checksum and model string before writing, and confirm the panel label and revision match.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →