EDID image for a Chi Mei N150X6-L01 panel, revision C1; in Chi Mei numbering N150 denotes a 15.0-inch display. The 256-byte size matches a complete 24C02 EEPROM dump, possibly with filler after the base block. Graphics drivers read this data to pick native resolution and timing, so a damaged EDID can mean a blank or wrongly scaled screen. Check the decoded fields and checksum in an EDID viewer, then program the panel EEPROM via I2C. Keep a backup of the original before writing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 7 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →