Chi Mei N154I2-L02 panel EDID, a 15.4-inch notebook display judging by the model prefix; no revision is stated. The 256-byte image fits a 24C02 EEPROM, the usual storage for panel identification data. When the operating system shows a generic or unknown monitor, or the backlight lights with no picture, rewriting a known-good EDID is a common fix. Inspect the file in an EDID viewer, confirm the checksum, and flash it with an I2C programmer. Save the original contents beforehand in case the dump differs.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 28 Apr 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →