EDID dump from a Chi Mei N154I2-L05 panel at revision C1, a 15.4-inch laptop LCD according to the N154 prefix. Its 256 bytes correspond to the full capacity of a 24C02 EEPROM and may contain the base EDID plus extension or filler bytes. Technicians use such images to recover panels whose identification block was wiped, causing no image or a wrong native mode. Program it over I2C/DDC with a suitable tool. Check both model and revision on the panel sticker and read the chip out first.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 7 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →