EDID firmware for a Chi Mei N156B3-L0B laptop LCD panel; the N156 code indicates a 15.6-inch size and no revision is listed. The file is 256 bytes, the capacity of the small 24C02-type memory that stores panel identification data. A technician reprograms it when the system cannot read the panel, reports an unknown display or refuses brightness and resolution control. Write it with an I2C programmer or a vendor EDID utility. Make sure the sticker model matches exactly, because a neighbouring variant can carry different timings.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 7 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →