Chi Mei N156B6-L06 panel EDID, revision C1, saved as a 256-byte binary. The descriptor reports the panel's identity and timing data to the notebook's graphics hardware during startup. A wiped or corrupted copy can produce a blank screen, wrong resolution or an unknown monitor entry, which reflashing this image can resolve. Writing is done with an EEPROM programmer or DDC-capable tools. Check the panel sticker for the same model and revision, decode the file to verify its checksum, and save existing data beforehand.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 7 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →