EDID image for the Chi Mei N156B6-L3D panel, revision C1, 256 bytes long. Note the L3D suffix, which distinguishes it from the more common N156B6-L06. The file contains the manufacturer and product codes plus timing descriptors the graphics controller needs to drive the screen at its native mode. It serves as a restore image for a panel whose descriptor memory is corrupted. Open it in an EDID editor to confirm the checksum, compare against your panel's label and revision, and back up the original chip before writing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 7 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →