EDID dump for a Chi Mei N156BGE panel with the suffix EB1, revision C2, stored in 256 bytes. The EB1 variant code differs from the common L-series suffixes, so match it carefully against the label on the panel. The data holds manufacturer ID, product code, native mode and timing descriptors read by the graphics controller. It is used to restore a corrupted panel descriptor causing no picture or wrong resolution. Decode and verify the checksum first, and keep a backup of the original EEPROM data.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 7 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →