EDID image for the Chi Mei N156BGE-L11 display panel, 256 bytes, revision not given. This is the identification block a panel presents over its display data channel, listing manufacturer, product code, native resolution and timing descriptors. Technicians reflash it when a panel shows no image, wrong resolution or generic detection after its EEPROM is corrupted. Note that L11 differs from the L21 and L52 variants of the same family. Decode the file, verify the checksum, confirm your panel model and back up its contents first.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 28 Apr 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →