Chi Mei N156BGE-L21 LCD panel EDID, revision C1, in a 256-byte file. The block describes to the notebook's GPU the panel's manufacturer, model code and supported timings. Typical use is reprogramming a damaged panel descriptor so the system detects the screen correctly again. A second C1 copy also exists, which can help cross-check data. Open the dump in an EDID decoding tool to confirm valid contents, match the revision against the panel sticker, and dump the current chip contents as a backup before flashing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 7 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →