Chi Mei N173HGE-L11 display EDID, marked C1 in the name, which most likely refers to the panel revision. The 256-byte binary is the identification and timing block the panel presents to the laptop's video output. It is useful when a panel shows no image, flickers at the wrong mode or appears as an unknown display after the descriptor was lost. Decode it in an EDID editor to review resolution and checksum, compare with the label on your panel, and dump the original memory before writing anything with a programmer.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →