A 256-byte EDID dump taken from a Chi Mei N173HGE-L11 LCD panel; the name does not specify a revision. Despite being listed as firmware, a file this small is the display identification block rather than system BIOS code. It stores manufacturer ID, product code, native resolution and detailed timing descriptors. Repairers use it to reprogram a panel whose EDID has been wiped, causing black screen or generic display detection. Inspect it with an EDID decoding tool, confirm a valid checksum, and keep a copy of the original data before flashing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 7 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →