Base 128-byte EDID for a Chunghwa CLAA140WA01A 14-inch LCD; the name gives no laptop model. The file holds the standard identification block a panel sends to the video controller. If the target EEPROM is 256 bytes, account for the size difference when programming. Use it to repair blank screens or detection errors caused by corrupted panel data. Check the panel part number on the rear label, save the existing chip contents first, and verify the checksum after writing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 7 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →