Panel EDID for a Chunghwa CLAA154WA LCD with the suffix 01Y, as written in the name. The 256-byte binary is a complete read of the display's configuration EEPROM, not motherboard BIOS code. No laptop model is given. The panel suffix matters, so confirm it on the rear sticker before use. Reflashing helps where corrupted identification stops the internal screen from initialising. Decode it first in an EDID tool, then write it with a programmer after saving the original contents.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 7 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →