Dell BIOS image for the Latitude 7400 on board 19765-1, with the Intel Management Engine region cleaned, saved as a 32 MB binary output image. A clean ME is normally used to fix ME errors, a fan running at full speed or a slow boot after board work. Dell numbers boards with a five-digit code and revision suffix printed on the PCB, so check that it matches. Back up the original 256 Mbit chip, and re-enter the service tag if the platform requires it.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @L9BCM2MdAgNjNDk1. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →