An 8 MB binary BIOS image whose name says only that the Management Engine region has been cleared; no model, brand or board number is given. A cleaned ME region is typically used to fix boards that refuse to power or loop after flashing, because the ME data is reset and rebuilt on first boot. The 8 MB size matches a 64 Mbit SPI chip, so verify the capacity of the flash on your board, read and save the original contents with a programmer such as a CH341A, and only write this image once you are sure it belongs to that exact board.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @anztechnology. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →