16 MB BIOS dump for the Dell OptiPlex 7040 desktop with the Intel Management Engine region cleaned, as the clr_me prefix indicates. A cleaned ME region lets the firmware rebuild its ME data, useful when corrupted ME causes boot problems or fan issues. Write it to the 128 Mbit SPI chip with an external programmer, after reading and saving the original contents, and check the service tag and system data after flashing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosdumpcomputer. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →