Production firmware component 140.1.01.1005 for Intel Comet Point LP chipsets at stepping A. This 68 KB module belongs to the low-power mobile line and is used as an input when rebuilding a CSME region with Intel FIT, for example after a failed update or a corrupted ME. It is not a standalone BIOS dump. Confirm that the PCH on the board is an LP part of the matching stepping, and read and store the original flash contents before programming anything back.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @generalbios. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @generalbios | 22 Jan 2025 | Open file on RM Schematics |
| @cidschematicandboardviewofficial | 22 Jan 2025 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 7 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →