Version 140.1.01.1009 of a Comet Point (CMP) firmware component for LP, low-power mobile PCHs at stepping A, released as a production build. The 68 KB module is one piece of the chipset firmware set and is normally merged into the ME region during an image rebuild with Intel FIT. Technicians use such files to repair boards with corrupt CSME data. Make sure the board uses an LP PCH of the right stepping, and keep a saved dump of the original SPI chip before writing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @generalbios. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @generalbios | 22 Jan 2025 | Open file on RM Schematics |
| @cidschematicandboardviewofficial | 22 Jan 2025 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 6 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →