Early production build 140.2.01.1007 of the Comet Point (CMP) chipset firmware component for H-series PCHs at stepping A. The file is 56 KB, a module size, so it serves as an input for composing a Management Engine image with Intel FIT rather than a ready-to-flash dump. It is useful when matching firmware to an older original configuration. Verify that the board uses the H variant and matching stepping, and never write any rebuilt image without first saving the original SPI contents.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @generalbios. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @generalbios | 22 Jan 2025 | Open file on RM Schematics |
| @cidschematicandboardviewofficial | 22 Jan 2025 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 6 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →