CMP 140.2.01.1018 H A PRD

BIOS .bin 56.0 KB Shared

Comet Point (CMP) chipset firmware module, version 140.2.01.1018, for the H platform at stepping A, marked as a production build. H refers to the high-performance PCH variant as opposed to LP mobile parts. The 56 KB file is a component used when assembling or repairing a CSME image in Intel FIT, not something to write directly onto a BIOS chip. Make sure the board carries an H-series PCH of the matching stepping, and back up the existing SPI flash before programming a rebuilt image.

The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @generalbios. Enginerys does not host this file.

All sources (3)

The same file was posted more than once. If one link is dead, try the next.

How to open a .bin file

A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.

CH341A + NeoProgrammer / AsProgrammerflashromRT809F / RT809HTL866II / T48UEFITool (to inspect)HxD (hex editor)

More about .bin files

Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →

Related files