Cannon Point (CNP) chipset firmware for the LP variant at stepping B, production version 300.1.11.1014. This 1.11 branch targets the earlier B stepping, unlike the 1.20 builds for stepping C, so the two are not interchangeable. The 68 KB module is meant to be integrated into a Management Engine image with Intel's Flash Image Tool, not programmed alone. Identify the PCH stepping on the board before choosing it, and back up the original SPI flash with a programmer before writing a rebuilt image.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @generalbios. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @generalbios | 22 Jan 2025 | Open file on RM Schematics |
| @cidschematicandboardviewofficial | 22 Jan 2025 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 28 Apr 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →