An early production build, 300.1.20.1009, of the Cannon Point chipset firmware component for LP platforms at stepping C. CNP is the code for the Cannon Point PCH, and the PRD suffix marks a production rather than pre-release build. At 68 KB it is a module for inclusion in an ME region via Intel FIT, not a complete BIOS. Use it when rebuilding firmware for a low-power board after confirming the stepping, and keep the original SPI contents backed up before any write.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @generalbios. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @generalbios | 22 Jan 2025 | Open file on RM Schematics |
| @cidschematicandboardviewofficial | 22 Jan 2025 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 7 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →