Intel Cannon Point (CNP) LP firmware module at stepping C, production version 300.1.20.1015. The 68 KB file is a sub-component, not a whole SPI image, and is normally used inside Intel's Flash Image Tool when composing or repairing the CSME region of a low-power mobile board. Older builds like this help reproduce an original configuration. Check that the chipset family and stepping match, never write it raw to a flash chip, and always save a full dump of the original chip with a programmer beforehand.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @generalbios. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @generalbios | 22 Jan 2025 | Open file on RM Schematics |
| @cidschematicandboardviewofficial | 22 Jan 2025 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 7 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →