Production release 300.1.20.1018 of an Intel Cannon Point chipset firmware module for the LP, low-power variant at stepping C. The 68 KB size shows it is a component and not a full BIOS dump, so it is not meant for direct programming onto an SPI chip. It is handy when an engineering or broken ME region must be rebuilt with Intel's Flash Image Tool. Verify the platform type and stepping against the PCH on the board, and keep a copy of the original flash content before modifying anything.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @generalbios. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @generalbios | 22 Jan 2025 | Open file on RM Schematics |
| @cidschematicandboardviewofficial | 22 Jan 2025 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 6 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →