Firmware module version 300.1.20.1022 for Intel Cannon Point (CNP) LP chipsets at stepping C, with the PRD tag marking a production release. This build is 72 KB, slightly larger than neighbouring revisions. It is a sub-component of the chipset firmware set, normally combined with the CSME image through Intel's Flash Image Tool rather than written to the BIOS chip alone. Before using it, check that the stepping and the LP platform match the target machine, and back up the existing SPI contents.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @generalbios. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @generalbios | 22 Jan 2025 | Open file on RM Schematics |
| @cidschematicandboardviewofficial | 22 Jan 2025 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 7 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →