Production build 300.1.20.1023 of a Cannon Point (CNP) chipset firmware component for the LP, low-power mobile PCH, stepping C. The 68 KB file is a standalone module of the kind usually inserted into a Management Engine region with Intel's FIT tooling, not a dump meant for an SPI programmer. Use it when a corrupted ME region has to be rebuilt. Confirm the PCH family, LP versus H, and stepping on the board, and keep a backup of the original flash before writing any rebuilt image.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @generalbios. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @generalbios | 22 Jan 2025 | Open file on RM Schematics |
| @cidschematicandboardviewofficial | 22 Jan 2025 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 7 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →