Intel chipset firmware module labelled CNP, version 300.1.20.1025, built for the LP variant at stepping C and marked PRD for production. CNP is Intel's usual code for the Cannon Point PCH, and LP points to the low-power mobile platform. At 68 KB it is a component, not a full SPI image, so it cannot be flashed directly to a chip. Technicians use such modules with Intel's Flash Image Tool when rebuilding or repairing a CSME region, and should match the PCH stepping first.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @generalbios. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @generalbios | 22 Jan 2025 | Open file on RM Schematics |
| @cidschematicandboardviewofficial | 22 Jan 2025 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 7 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →