Early production firmware component, version 300.2.11.1004, for the Intel Cannon Point H chipset, B stepping. The 56 KB file belongs to the 300-series PCH firmware set and is integrated into the engine region when a board firmware image is rebuilt. It does not replace a BIOS dump and should not be written alone to flash. Use it mainly when matching an older original image, verify the H PCH variant on the board, and always make a backup read of the SPI chip first.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @generalbios. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @generalbios | 22 Jan 2025 | Open file on RM Schematics |
| @cidschematicandboardviewofficial | 22 Jan 2025 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 6 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →