Cannon Point H firmware, build 300.2.11.1008, stepping B, production signed, from the 300-series chipset generation. As a 56 KB module it is a piece of the larger CSME firmware and gets inserted during image rebuilding rather than flashed directly. It is one of the earlier builds in this series, so later versions may include fixes. Repair work with it typically involves Intel FIT and an SPI programmer. Confirm the PCH is H type and save the original chip dump before writing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @generalbios. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @generalbios | 22 Jan 2025 | Open file on RM Schematics |
| @cidschematicandboardviewofficial | 22 Jan 2025 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 7 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →