Production firmware module for the Cannon Point H PCH, stepping B, version 300.2.11.1011. Intel uses the CNP name for its 300-series chipsets. The file measures 56 KB, confirming it is a component of the engine region and not a full BIOS. Technicians integrate it with Intel Flash Image Tool when the original firmware region is corrupted or must be rebuilt. Check that the target board uses an H-type PCH, and preserve a full dump of the SPI chip before writing a modified image.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @generalbios. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @generalbios | 22 Jan 2025 | Open file on RM Schematics |
| @cidschematicandboardviewofficial | 22 Jan 2025 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 7 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →