Cannon Point H-series chipset firmware, version 300.2.11.1013, stepping B, production release. Small at 56 KB, it is one module from the 300-series PCH firmware and is used by technicians to rebuild the CSME region with Intel Flash Image Tool. It is useful when a board reports engine faults or stalls at power-on after firmware corruption. Confirm the board PCH type and compare versions with the current dump, and always save a full read of the SPI flash before writing a new image.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @generalbios. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @generalbios | 22 Jan 2025 | Open file on RM Schematics |
| @cidschematicandboardviewofficial | 22 Jan 2025 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 6 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →