Intel Cannon Point firmware build 300.2.11.1018 for the H-type chipset, stepping B, marked PRD for production. This 56 KB component sits within the 300-series PCH firmware set and is normally integrated with Intel Flash Image Tool rather than flashed alone. It suits rebuilding the engine region on desktop boards or laptops with an H-series PCH. Note that 1019 is absent from this series. Read the board flash with a programmer and keep that backup before writing anything new.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @generalbios. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @generalbios | 22 Jan 2025 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 7 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →