Production firmware component numbered 300.2.11.1024 for the Intel Cannon Point H chipset, B stepping. The 56 KB binary belongs to the 300-series PCH and is used when a technician rebuilds or updates the engine firmware region of a board, typically through Intel Flash Image Tool. It will not boot anything on its own and must not be flashed as a full BIOS. Match the H versus LP PCH type to the board, and read and save the original SPI chip with a programmer before writing a modified image.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @generalbios. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @generalbios | 22 Jan 2025 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 6 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →