BIOS image for the HP Compaq CQ42-372TU with an Intel Core i3 processor, labelled Power, which suggests it was saved or used to fix a no-power condition. It is a 2.00 MB binary, smaller than the 4.00 MB Display file for the same model, so the two likely target different flash chips or regions. Check which chip on your board it belongs to before programming. Typical use is reflashing the SPI chip with a hardware programmer, after first dumping the original contents and confirming the chip capacity matches.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @bios_laptop. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →