Firmware dump for the D-Link DSL-2730U router, taken from a 25Q64 flash chip, which is an 8 MB part, as the name confirms. It carries a version tag of 1.0.0, an OK mark meaning tested, and a black note probably referring to the case colour of the hardware variant. Archive size is 5.20 MB. Use it to rewrite the SPI flash with a programmer on a bricked unit, after backing up the original chip and confirming your router actually uses an 8 MB flash.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (12)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 16 Aug 2020 | Open file on RM Schematics |
| @biositechyangiyer | 18 Aug 2020 | Open file on RM Schematics |
| @laptexlaptopbios | 19 Aug 2020 | Open file on RM Schematics |
| @biositechyangiyer | 27 Aug 2020 | Open file on RM Schematics |
| @biositechyangiyer | 10 Sept 2020 | Open file on RM Schematics |
| @one5technology | 21 Nov 2020 | Open file on RM Schematics |
| @pepeelectronica | 24 Apr 2022 | Open file on RM Schematics |
| @biosdumpcomputer | 26 May 2022 | Open file on RM Schematics |
| @biosdumpcomputer | 26 May 2022 | Open file on RM Schematics |
| @biosdumpcomputer | 26 May 2022 | Open file on RM Schematics |
| @schematics_bios | 25 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 1 Aug 2026 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →