Firmware for the D-Link DSL-2750U ADSL router, hardware version V1, with the name pointing to firmware build ME_1.03, where ME most likely denotes a regional variant. The 6.42 MB RAR archive is intended for restoring a router that no longer boots or has a damaged flash. Hardware revision on the device label must match, as D-Link releases differ between revisions and regions. Depending on the content it can be loaded via the recovery web page, TFTP or a programmer after backing up the original flash.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 14 Jun 2022 | Open file on RM Schematics |
| @fileservicelaptop | 14 Jun 2022 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →