A Dell D630 panel EDID dump for a CLAA141WB03S A8 LCD at 1280x800, with the token 24C021 pointing to the 2-kilobit serial EEPROM it was read from. The image is 256 bytes, the full capacity of that chip. Use it to restore identification on a panel that reports nothing, or that shows corruption after a bad write. Confirm the panel model and A8 revision on the sticker. Read and keep the existing chip contents before flashing with a programmer and test clip.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (7)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @pepeelectronica | 24 Apr 2022 | Open file on RM Schematics |
| @acodis_lcd_datasheets_EDID | 25 Jun 2023 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 29 Apr 2025 | Open file on RM Schematics |
| @schematics_bios | 25 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 1 Aug 2026 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →