BIOS dump of 8 MB for Quanta board DA0BLMMB6E0 revision E, stored as a raw bin file. The name describes the image as assembled and tested OK, meaning it was put together from working parts and confirmed to boot. The DA0 prefix is the Quanta numbering scheme, used on boards for several notebook brands. Write it to an 8 MB SPI flash chip with a programmer after reading and saving the original contents. Confirm the board number and revision on the PCB before flashing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @bioshub. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →