Raw 16 MB binary flash image, an outimage read from Quanta board DA0LV6MB6F0 at revision F. The name lists no laptop model, but the board number follows Quanta's DA0...MB... ODM pattern. A 16 MB file matches a 128 Mbit SPI chip and can be written directly with a programmer such as a CH341A or RT809 through software like AsProgrammer or NeoProgrammer. Before flashing, make sure the PCB shows the same number and revision, read and keep the original contents, and verify the chip capacity.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @efibios. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →