Firmware for Quanta mainboard DAUT1AMB6E1, revision E, compressed as a small 918 KB RAR. Quanta codes carry the project name, here UT1, along with an MB tag and a revision suffix, so the printed number on the PCB is the reliable way to confirm compatibility. The small archive size suggests a compact image, so check which chip it targets once extracted. Read and keep the original contents with a programmer before writing, and verify the write afterwards.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (12)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Jan 2017 | Open file on RM Schematics |
| @pepeelectronica | 20 Apr 2022 | Open file on RM Schematics |
| @pepeelectronica | 21 Apr 2022 | Open file on RM Schematics |
| @pepeelectronica | 24 Apr 2022 | Open file on RM Schematics |
| @biosbigarchives | 31 Oct 2022 | Open file on RM Schematics |
| @generalbios | 23 Sept 2023 | Open file on RM Schematics |
| @generalbios | 29 Sept 2023 | Open file on RM Schematics |
| @generalbios | 26 Oct 2023 | Open file on RM Schematics |
| @schematics_bios | 23 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 23 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 25 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 1 Aug 2026 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →